Series GasWAVE
A series of filter elements of corrugated type based on nonwovens, designed for mechanical filtration of fine particles.
The corrugated filter layer provides a high life of the filter elements and low flow resistance.
TH-CP | Filter element based on cellulose paper impregnated with resin and polyester fiber reinforced. Designed for mechanical filtration of gases and removal of fine particles. Working temperature: -10 + 70°С, short time to 120°С, 30 minutes at pH 7. Working temperature: to 120°С - on request. |
TH-PEM | Polyester with microporous PTFE membrane filter element. Designed for mechanical filtration of gases and removal of fine particles. The filter element is designed for fine (1 micron) filtration of gas environment. Due to the microfiltration membrane PTFE applied on the outer filtering surface of the polyester web, the filter element is capable of regeneration. Working temperature: -10 + 70°С, short time to 120°С, 30 minutes at pH 7. Working temperature: to 140°С - on request. |
TH-PS | Polyphenylsulfide based filter element. Designed to separate dry solids from natural gas, biogas or other gaseous environment. Working temperature: -10 + 70°С, short time to 120°С, 30 minutes at pH 7. Working temperature: to 170°С - on request. |
TH-PE | Polyester based filter element. It is used for mechanical cleaning of dry gases without the presence of liquid. Working temperature: -10 + 120°С. |
TH-PP | Polypropylene filter element. Used when filtering gases when high chemical resistance and chemical stability are required. Working temperature: -10 + 60°С. |
TH-MGCP | The filter element is a solid corrugated package of microglass and reinforced cellulose paper. Designed to separate small solid particles from (wet) natural gas, biogas or other gaseous environment. The filter element has the function of coalescence. Working temperature: -10 + 70°С, short time to 120°С, 30 minutes at pH 7. Working temperature: to 170°С - on request. |
Filter materials
Filter layer | Cellulose paper, polyester, polypropylene, microglass fiber, polyester with microporous PTFE membrane |
Inner and outer shell | Galvanized steel Stainless steel on request |
End cover | Galvanized steel Stainless steel on request |
Mechanical seal | Felt On request: Buna-N or Viton |
Type of connection of the filtering material and metal parts | Glue - gas resistant polyurethane. Other types of adhesive joints on request. |
Performance data
Max temperature, °С | 70 (on request to 170) |
Max pressure drop, MPa | 0,2-0,3 (specified when ordering) |
Recommended differential pressure | 800-1000 |