Products

software
Software

Configuration software for operator panels.

Series CoaLINE
Series CoaLINE

Gas filtration is the release of a liquid.

The main advantage of the CoaLINE filter element is a large layer of borosilicate fiberglass with controlled winding density.

Клапан предохранительный запорный
Клапан предохранительный запорный
Cпособ выпуска: открытого/закрытого типа. Тип корпуса: проходной, угловой. Конструкция корпуса: односедельный, двухседельный. Способу нагружения: рычажно-грузовые и пружинные. Уровень подъема тарелки: малоподъемные (до 0,05 диаметра седла); среднеподъемные…
Flanges
Flanges

Armature
Armature

GOST 5781-82 Hot-rolled steel for reinforcement of ferroconcrete structures.

Steel: 25Г2С.

Weldolets®
Weldolets®

ASME B16.9-2007, ASME B16.25-2007

DIN 2616-1-1991, DIN 2616-2-1991

Hot-rolled plate
Hot-rolled plate
Bolt
Bolt

ASTM A SA-193 GR.B7, ASME B 18.2.1-1996, ASME B 18.2.1

SA-193 GR.B7 Spec, SA-193 (Studbolt)

GOST 9066-75 (type B, model 1)

IS 26-2040-69 (type 1), 26.260.2043-2004, steel 40 by GOST 9066-75 (type B, model 1), IS 26-2040-69 (type 1), 26.260.2043-2004

Flanges
Flanges

GOST 12821-80 Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm²)

GOST 12820-80 Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm²)

GOST 28759.3-90 Steel butt welded flanges of vessels and apparatus

GOST 28759.2-90 Steel flat welded flanges of vessels and apparatus

GOST 28759.4-90 Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections

GOST 28919-91 Flange connections of wellhead equipment

GOST 9399-81 Threaded steel flanges for Pn 20-100 МРа (200-1000 kgf/cm²)

GOST R 54432-2011 Flanges for valves, fittings, and pipelines for nominal pressure from Pn1 to Pn 200

GOST 33259-2015 Flanges for valves, fittings and pipelines for pressure to Pn 250

ASME B16.5 (up to СL=2500, DN 1”-24”)

ASME B16.47(A, B) (up to СL=600, DN 26”-42”)

DIN EN 1092-1 (up to PN=320, DN 1600)

Tees equal and transition
Tees equal and transition

GOST 17376-2001, GOST 22801 – 83, GOST 22802 – 83

TS 1468-010-593377520-2003, TS 3600-010-78786272-2007
TS 3600-010-88626180-2012

IS 34 10.433 – 90, IS 34 10.510 – 90, IS 34 10.511 – 90
IS 34 10.512 – 90, IS 34 10.513 – 90, IS 34 42.675 – 84
IS 34 42.676 – 84, IS 34 42.673 – 84

EN-DIN, ASTM- ASME

Reducers concentric and eccentric
Reducers concentric and eccentric

Reducer is a fitting used in piping systems between two pipes of different diameters.

GOST 17378-2001
GOST 22806 – 83
GOST 22826 – 83

TS 1468-001-01394395-95, TS 1468-010-593377520-2003
TS 1468-030-20872280-2002, TS 1468-040-20872280-2010
TS 1468-284-20872280-2005, TS 1469-007-04834179-2005
TS 14-1-5598-2011, TS 3600-010-88626180-2012

IS 34 10.700 – 97, IS 34 10.422 – 90
IS 34 10.423 – 90, IS 24.125.09 – 89
IS 24.125.08 – 89

EN-DIN, ASTM-ASME

Sharply curved offsets
Sharply curved offsets

GOST 17375-2001, GOST 30753-2001

TS 1469-001-48733781-2001, TS 1468-010-593377520-2003

TS 1468-020-20872280-2004, TS 1468-040-20872280-2010

TS 1468-284-20872280-2005, TS 1469-007-04834179-2005

TS 1468-002-62226329-2012, TS 14-1-5598-2011

TS 3600-010-88626180-2012

EN-DIN, ASTM- ASME

Pipes by GOST
Pipes by GOST

GOST 8731-74 «Seamless hot-deformed steel pipes. Specifications»

GOST 550-75 «Seamless steel tubes for petroleum processing and petrochemical industry. Specifications»

GOST 9940 «Seamless hot deformed tubes made of corrosion resistant steel»

GOST 9941 «Seamless cold- and warm-deformed tubes of corrosion-resistant steel»

GOST 633-80 «Tubing pipes and couplings for them. Specifications»

GOST 632-80 «Casing pipes with couplings. Technical conditions»

petroleum centrifugal pumps of types тка, нкв, нк
Petroleum centrifugal pumps of types ТКА, НКВ, НК

Used in process plants for pumping oil, oil products, liquefied hydrocarbon gases, organic solvents and other liquids similar to the specified viscosity and corrosive effect on the pump parts.

Air release valve
Air release valve
Globe valve
Globe valve

Design: односедёльные и двухседёльные, клеточные, мембранные, золотниковые.
Проход: проходные, угловые, трехходовые.
Control:manual, driving (electric drive, pneumatic, hydraulic, electromagnetic).
Connection: flanged, socket, nipple, цапковое, welding.

Helix type heat exchangers with spiral partitions
Helix type heat exchangers with spiral partitions

It is a shell-and-tube heat exchanger with helicoid partitions in the annular space.

Ball valve
Ball valve

Shut-off valve: ball.
Construction: welded housing, composite body (of 2 or 3 parts).
Access to the shutter: top (without dismantling the crane from the pipeline), side (with dismantling the crane from the pipeline).
Проход: full-bore, неполнопроходной (с редуцированным проходом).
The seal in the saddle: soft-seal, seal «metal-to-metal».
Control: manual (handle, reducer with handwheel), driving (electric, pneumatic, hydraulic).
Connection: flange, welded, socket.

enc 4/5/6
ENC 4/5/6

NEMA 4/IP65 Enclosures.

sub-cub 1/2
SUB-CUB 1/2

Complete 6-digit Component Counters.

HESS
HESS

Hall Effect Speed Sensor.

ifma
IFMA

DIN-Rail Frequency to Analog Converter.

large display ld
LD

Large display 2.25" & 4" High.

cub5tc
CUB5TC

Miniature Electronic 5-Digit Thermocouple Meter.

cub5v
CUB5V

Miniature Electronic 5-Digit DC Voltmeter.

timer cub7t RLC
CUB7T

Programmable General Purpose Electronic Timer.

ditak 8
DITAK 8

Adjustable Timebase 5-digit Rate Indicator.

Coated mesh
Coated mesh

This material is made by way of cross weaving metal provolok-bases, passing along all perimeter of a cloth.

Vane separator
Vane separator

Vane packets intended for the separation of gas dispersion systems, with the release of solid particles and liquid droplets.

Coalescer gas/liquid
Coalescer gas/liquid

We produce justification and selection process.

We develop the detailed technological scheme including requirements for automation.

Carries out the valves and instrumentation.

Modular filter systems
Modular filter systems

The system consists of one or more filters, interconnected auxiliary piping, valves and instrumentation.

Gas sterilizing filters
Gas sterilizing filters

The degree of purification - not less than 99.99999% for particles larger than 0.01 microns.

Filter element – nickel.

cub5
CUB5

Miniature Electronic 8-digit Dual Counter and Rate Indicator.

cub7
CUB7

Miniature Electronic 8 Digit Counter or Timer.

g303
G303

Graphic LCD Operator Interface Terminal.

Series GasWAVE
Series GasWAVE

Mechanical gas filtration.

Filtering elements of corrugated type on the basis of nonwoven materials intended for mechanical filtration of fine particles.

Check valve
Check valve

Construction: lifting, plunger, swivel and ball.
Mounting: vertical / horizontal.
Material: stainless steel, carbon steel, cast iron, bronze.

Blind flanges
Blind flanges

Beam
Beam

Materials by GOST 8239 Hot-rolled steel flange beams.

Weldoflange
Weldoflange

ASME B16.9-2007, ASME B16.25-2007

DIN 2616-1-1991, DIN 2616-2-1991

Cold-rolled plate
Cold-rolled plate

Nut
Nut

ASME B 18.2.4.6 SA 194 GR.2H
ASME B 18.2.4.6 SA-194 Gr.2H Spec SA-194
ASME/ANSI B 18.2.2 SA-194 GR.2H Spec SA-194 (High nut)
Steel 25 by GOST 9064-75 (type А), GOST 5915-70 (model 1)

IS 26-2041-69, 26.260.2043-2004
Steel 35Х by GOST 9064-75 (type А)
GOST 5915-70 (model 1), IS 26-2041-69, 26.260.2043-2004

Plug flanged
Plug flanged

GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/cm2)

GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/cm2)

Material: carbon, alloy or stainless steel, incoloy and etc. Russian and foreign production.

Bent branches
Bent branches

TS 1468-010-593377520-2003, TS 1468-036-20872280-2008

TS 1468-038-20872280-2011, TS 1468-040-20872280-2010

TS 1468-284-20872280-2005, TS 14-1-5598-2011

TS 3600-010-88626180-2012, TS 51-515-91

Pipes by TS
Pipes by TS

ТУ 14-3-190-2004 «Трубы бесшовные для котельных установок и трубопроводов»

ТУ 14-3-1600-89 «Трубы горячедеформированные»

ТУ 14-3-1128-2000 «Трубы стальные бесшовные горячедеформированные для газопроводов газлифтных систем и обустройства нефтяных и газовых месторождений»

ТУ 14-3-1801-92 «Трубы стальные бесшовные горячедеформированные повышенного качества для газапроводов газлифтных систем и обустройства нефтяных и газовых месторождений»

ТУ 14-3-1831-92 «Трубы бесшовные сероводородостойкие»

ТУ 14-161-134-93 «Трубы стальные бесшовные горячедеформированные для газопроводов и газлифтных систем»

ТУ 14-161-147-94 «Трубы бесшовные горячедеформированные сероводостойкие и хладостойкие»

ТУ 14-161-148-94 «Трубы бесшовные горячедеформированные нефтепроводные повышенной коррозионной и хладостойкости»

ТУ 14-3Р-91-2004 «Трубы стальные бесшовные горячедеформированные нефтегазопроводные повышенной стойкости против локальной коррозии и хладостойкие»

ТУ 14.3-15-71-88 «Трубы бурильные с приварными замками ГОСТ Р50278-92»

petroleum centrifugal pumps of types ткам
Petroleum centrifugal pumps of types ТКАм

Designed for pumping in stationary conditions, neutral, corrosive, flammable and combustible liquids and liquefied gases.

Steam trap
Steam trap
Blowoff valve
Blowoff valve

Pressure regulators
Pressure regulators

Principle of work: the direct-flow, combined.
Types: astatic, static, изодромные.
Construction: односедельные, двухседельные, диафрагменные, шланговые, крановые, заслоночные.
Sensitive element: membrane - flat or corrugated.

column equipment
Column equipment

We carry out design, production and delivery of devices columned dish-shaped and nozzle, working under pressure, vacuum or without pressure.

Tube Heat Exchangers with floating head with a U-tubes
Tube Heat Exchangers with floating head with a U-tubes

Designed to heat liquids and gases in industrial processes refining, petrochemical, chemical, oil, gas and other industries.

Plug valve
Plug valve

Shut-off valve: cone.
Проход: full-bore, неполнопроходной (с редуцированным проходом).
The seal in the saddle: soft-seal, seal «metal-to-metal».
Control: manual (handle, reducer with handwheel), driving (electric, pneumatic, hydraulic).
Connection: flange, welded, socket.

enc 5a/5b/5c
ENC 5A/5B/5C

NEMA 4 1/8 DIN Series Enclosures.

PSAH
PSAH

Hall Effect Speed Sensor.

ifmr
IFMR

DIN-Rail Speed Switch.

large display ld timer
LD Timer

Large Display Timer and Cycle Counter.

cub5rt
CUB5RT

Miniature Electronic 5-Digit RTD Meter.

cub5i
CUB5I

Miniature Electronic 5-Digit DC Current Meter.

cub5
CUB5

Miniature Electronic 8-digit Dual Counter and Rate Indicator.

Inlet flow damper
Inlet flow damper

Serves to reduce the flow velocity at the reactor inlet.

Wire-mesh separator
Wire-mesh separator

Wire-mesh separator are designed to separate oil field produced in an emulsion of natural gas and oil.

Coalescer liquid/liquid
Coalescer liquid/liquid

We produce variety of designs.

Ongoing technological calculation.

Develop documentation in the amount of the technical design of equipment.

Duplex filter systems
Duplex filter systems

The system consists of two similar filters, interconnected auxiliary piping, valves and instrumentation.

Air preparation filters
Air preparation filters

Filtration, microns: up to 0,3.

c48c
C48C

1/16 DIN Counters.

cub7p
CUB7P

Programmable Electronic 8-Digit Counter.

g304k2
G304K2

Kadet 2 Operator Interface with 4" TFT Display.

Series TechSLIT
Series TechSLIT

Fluid filtration.

The main advantage of the slotted filtering surface is the formation of an additional all-out layer of mechanical impurities during the filtration process.

Elbows
Elbows

Сhannel steel
Сhannel steel

Assortment by GOST 8240, GOST 8281, GOST 8278.

Clad plates
Clad plates

Our company produces clad plates (two and three layer) by pack rolling method.

Base metal: SA516 Gr.70, SA387 Gr12, SA387Gr22 and various carbon steel grades.
Cladding layer: various stainless steel grades SS 316, SS 317, SS 321, SS 347, SS 410, etc.

Clad plates are undergone the following:

  • 100% ultrasonic testing of metal integrity and bonding zone;
  • mechanical properties test, including:
    • impact strength test at below-zero (up to -70 °С) and above-zero (up to 550°С ) temperatures;
    • test after mechanical aging;
    • shear test of cladding layer and cold bending;
    • other tests upon request of the customer;
  • macrographic examination.
Stud
Stud

GOST 9066 75 Studs for flanged connections with medium temperature from 0°С to 650°С

GOST 10494-80 Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa

GOST 22042-76 Studs for smooth hole parts. Product grade B

IS 26-2040-96

Plug elliptical
Plug elliptical

ASME B16.9-2007, ASME B16.25-2007

TS 1468-030-20872280-2005, TS 1468-010-593377520-2003

DIN 2617-1991

GOST 17379-01

Elbows welded pie
Elbows welded pie

IS 34 10.752 – 90

IS 34 10.419 – 90

IS 36-21-77

IS 34 42.663

Pipes by ASTM
Pipes by ASTM

ASTM A 106 «Seamless Carbon Steel Pipe for High-Temperature Service»

ASTM A53 «Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless»

ASTM A213 «Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes»

ASTM A312 «Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes»

petroleum centrifugal pumps of types ht
Petroleum centrifugal pumps of types HT

Designed for pumping oil, liquefied petroleum gas and other petroleum products.

Oil Separator
Oil Separator
Vessel equipment
Vessel equipment

We provide design, manufacture and supply of vessel equipment according to TS 3600-013-00220575-2002.

Tube Heat Exchangers with fixed tubesheets and with expansion joint in the shell
Tube Heat Exchangers with fixed tubesheets and with expansion joint in the shell

Designed for heating and cooling of liquids and gases in industrial processes refining, petrochemical, chemical and gas industries.

Wedge gate valve
Wedge gate valve

Construction: with sliding spindle, with non-rising spindle; double-acting.
Shut-off valve: a metal wedge (hard; dual; elastic).
Проход: full-bore, неполнопроходной (with reduced passage).
The seal in the saddle: seal «metal-to-metal».
Control: manual (handwheel, reducer), driving (electric, pneumatic, hydraulic).
Connection: flange, welded, socket

Inductive Proximity Sensors
Inductive Proximity Sensors

Detect the Presence of Metal Objects Which Come Within Range of Their Oscillating Field and Provide Target Detection to «Zero Speed».

afcm
AFCM

Analog To Frequency Converter Module.

large display lda
LDA

Large DC Volt/Current/Process Display.

paxltc
PAXLTC

PAX Lite Thermocouple Meter.

pax li/lv
PAX LI/LV

PAXLI - PAX Lite Current Meters.
PAXLV - PAX Lite Voltmeters.

paxlr
PAXLR

PAX® Lite Rate Meter.

Vane packs
Vane packs

Vane packs provide the settling of particles under the influence of inertial forces.

Сentrifugal separator
Сentrifugal separator

Centrifugal separators are designed for cleaning oil or gas, including for degassing oil and gas treatment simultaneously.

Oil separator
Oil separator

The oil separator separates oil mixed with the compressed gas, and returns it to the sump or crankcase of the compressor, thus allowing effective lubrication of moving parts.

Mobile filter systems
Mobile filter systems

A distinctive feature of this system is to place filters on the latest mobile platforms or units.

 Filters of natural and associated gas
Filters of natural and associated gas

Filtration, microns: up to 0,3.

paxlcr
PAXLCR

1/8 DIN PAX Lite Dual Counter and Rate Meter.

cub4l/l8/l8w
CUB4L/L8/L8W

Miniature Electronic Counters.

g306a/m
G306A/M

G306A: Graphical Color LCD Operator Interface Terminal with TFT QVGA Display and Touchscreen.
G306M: Graphical Monochrome LCD Operator Interface Terminal with QVGA Display and Touchscreen.

Series TechWM
Series TechWM

Filtration of liquid or gas.

Cartridge filter elements based on metal mesh made of steel AISI 304 and AISI 316.

Fasteners
Fasteners

Angle steel
Angle steel

Assortment by GOST 8509-93.

Heat-deformed plate

Washer
Washer

GOST 11371-78, GOST 9065-75 et al.

Steel: 20, 35, 45, 40Х, 20Х13, 14Х17Н2, 30ХМА, 09Г2С, 25Х1МФ, 12Х18Н10Т, 45Х14Н14В2М, ХН35ВТ et al.

Blind flanged
Blind flanged

GOST 1050-88, GOST 12816-80

ТМ-06-ДТР-113, ТМ-06-ДТР-014
ТМ-06-ДТР-015, ТМ-06-ДТР-141, ТМ-06-ДТР-057 Изм. 2
ТМ-06-ДТР-054, ТМ-06-ДТА-018, ТМ-06-ДТР-053 Изм. 4
ТМ-06-ДТА-009 Изм. 2,