Combined and universal flare systems
Scope of application
designed to ensure safety at hazardous production facilities with permanent (technological or purging), periodic and emergency discharges of combustible gases, by highly efficient smokeless combustion or dispersion
Design
1. the equivalent diameter of the outlet nozzle of the flare tip can be varied depending on the relief gas flow
2. smokeless/sootless combustion is provided for the entire relief gas flow range without additional air or steam supply
3. the high pressure and low pressure flow can be combined to burn in one head
| Parameter | Value |
|---|---|
| Working environment | associated petroleum gas, natural gas, various gases from process units |
| Flare unit capacity, nm3/h | according to customer requirements, permanent/emergency discharge |
| Operating pressure, MPa (excess pressure) | up to 0,3 and above |
| Discharge gas temperature, °С | -30 ÷ +300 |
| Average service life before overhaul, h, not less | 20 000 |
| Fuel gas consumption for reserve/pilot burners | 25 |
| Operating pressure of the fuel gas supplied to the pilot burner, MPa (excess pressure) | 0,2 - 0,3 |
| Flame shaft diameter, mm | 150 ÷ 1400 |
| Height of the flare unit, mm | 10 000 - 120 000 |
| Flame tip diameter, mm | 50 - 900 |
| Number of pilot burners, pcs. | 1 - 5 |
| Service life, years | up to 30 |
| Power consumption, W, max | 200 - 400 |
| Unit type | Smokeless / sootless |