Smokeless / sootless flare systems
Scope of application
Flare systems are used at hazardous production facilities for the extraction, collection and product preparation from oilfields, gas and gas condensate fields in chemical, petrochemical, oil and gas processing, oil and gas industry
Design
1. the equivalent diameter of the outlet nozzle of the flare tip can be varied depending on the relief gas flow
2. smokeless/sootless combustion is provided for the entire relief gas flow range without additional air or steam supply
| Parameter | Value |
|---|---|
| Working environment | associated petroleum gas, natural gas, various gases from process units |
| Flare unit capacity, nm3/hour | according to customer requirements, permanent/emergency discharge |
| Operating pressure, MPa (excess pressure) | up to 0,3 and above |
| Discharge gas temperature, °С | -30 ÷ +300 |
| Average service life before overhaul, h, not less | 20 000 |
| Fuel gas consumption for reserve/pilot burners | 25 |
| Operating pressure of the fuel gas supplied to the pilot burner, MPa (excess pressure) | 0,2 - 0,3 |
| Flame shaft diameter, mm | 150 ÷ 1400 |
| Height of the flare unit, mm | 10 000 - 120 000 |
| Flame tip diameter, mm | 50 - 900 |
| Number of pilot burners, pcs. | 1 - 5 |
| Service life, years | up to 30 |
| Power consumption, W, max | 200 - 400 |
| Unit type | Smokeless / sootless |