Filtration of liquid or gas.
Cartridge filter elements based on metal mesh made of steel AISI 304 and AISI 316.
The filter element is an all-metal construction.
In order to increase the area of the filtering surface, the filtering material can be laid in the form of corrugations, which allows increasing the throughput and resource of the filter element. Depending on the filtering task, the number of corrugations in the filter bag is calculated taking into account contamination, viscosity of the filtrate and requirements for regeneration.
The filter elements of the TechWM series can be used to filter liquid and gaseous environment. Depending on the operating conditions, they are manufactured with an adhesive or welded joint.
The construction of the filter element takes into account the direction of flow of the filtrate.
|Filter mesh||Steel AISI 304 or AISI 316
Other - on request
Stainless steel on request
TechWM filter elements can be made with different sizes depending on the task and the technical parameters of operation.
|Filtration rate, µm||from 5 to 4000|
|Allowable pressure drop, MPa||to 1,0 (specified upon request)|
|Operating temperature, °С||Glue - to 120
Welded - to 400
|Flow direction||Outside inside
Possible to change the direction of flow on request